自动控制 三菱plc 西门子plc 欧姆龙plc 台达plc 松下plc plc技术 变频器技术 传感器设计 仪器仪表 电机原理 数控机床 人机界面 数据采集 电源设计

首页->电源设计->正文

请教几个专业英文

上篇: 软件开机、关机电路
下篇: 为什么我的热电耦测温对电压精度要求这么高?

首先这个不知是不是输入缺相
  supply loss: one or more of the power(input) supply phases is open-circuit.
  而这两个又是什么呢?
  power supply: one or more of the intemal power supplies is out of tolerance.
  phase seqvence: connections to E1 and E3 are not the same phases as are connected to L1 and L3 investigate and correct.
1:
是;电压超出范围;相序(你好象拼错了)故障。
2:
supply loss: one or more of the power(input) supply phases is open-circuit
  电源缺相:一相或多相电源输入端开路中(即无电压)power supply: one or more of the intemal power supplies is out of tolerance.
    电源(问题):电源输入端的一相或多相不在正常范围内(电压不正常)
  phase seqvence: connections to E1 and E3 are not the same phases as are connected to L1 and L3 investigate and correct
  相序问题:E1和E3的相序连接与L1和L3的连接相序不一样或不正确
  
3:
感谢二位的热心帮助!!!

相关资料:
 请教关于工控pc机的问题 显示器的问题!急!!
 只用一个按键控制电源的开关,怎么做啊? 求教:(价格)
 数字模拟地及其电源的疑问! 为什么我的热电耦测温对电压精度要求这么高?
 软件开机、关机电路 请各位大虾推荐一种比较实惠的看门狗芯片,先谢了!
 关于8段数码的稳定问题 富士开关电源的问题!!!
 怎么计算电容电感值? 电话接口电路共地的问题
 关于 做塑胶制品的 压力表 会不会出问题啊?
 电源干扰处理出招? 请问电解电容与一般电容在原理上有什么区别,在应用上


工控产品网 | 工控方案网 | 工控企业网 | 联系我们
Copyright © 2005 - 2007 中国工业自动化信息网